Hakko FM-203. Soldering, Desoldering and SMD Rework Station 140W
Цена - по запросу
- Производитель: Hakko
- Модель: FM-203
- Наличие: Нет в наличии
- Multi-station that enables soldering, desoldering, and SMD rework all with a single unit
- Selectable soldering iron for N2 system or micro soldering as usage at your option
| A single station plays multiple roles: Soldering, desoldering, and SMD rework | |||||||||||||||||||||||||||
 | Two handpieces can be selected in various combinations *This station is equipped with one HAKKO FM-2027 handpiece. | ||||||||||||||||||||||||||
 | A wide range of handpiece selection · Figures of connectable handpieces are shown on the connectors as well as the indications of "Channel D" and "Channel S". | ||||||||||||||||||||||||||
 | Handpiece combination examples | ||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
 | Poweful thermal recovery performance | ||||||||||||||||||||||||||
| · See how much its thermal recovery is improved by using a composite tip | |||||||||||||||||||||||||||
 |
 | Power save function | ||
| · Sleep function | : | While the handpiece is being placed on the iron holder (HAKKO FH-200), the sleep function is activated and decreases the temperature of tip on the holder up to approximately 200°C , preventing the tip from being oxidized. In addition, this function can relieve the load applied to the tip due to the high-temperature settings required for lead-free soldering. | |
| · Auto power shut-off function | : | By connecting the iron holder (HAKKO FH-200) and station with the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.  | |
 | Combined use with an optional handpiece (HAKKO FM-2026, etc.) enables use of the N2 system | ||
 | Buzzer ON/OFF setting is available | ||
| · Whether to make the buzzer sound or not when an error occurs or a target temperature is reached is settable. | |||
Packing List
| Model No. | Packing List |
| FM-203 | Station + One Soldering Iron  1. HAKKO FM-203 Station 2. Soldering iron(HAKKO FM-2027) 3. Control card 4. Heat resistant pad 5. Iron holder(No. FH200-01: with HAKKO 599B tip cleaner) 6. Tip tray *7. Power cord *8. Connecting cable *9. Instruction manual: 1 for each * No photos are shown for parts *7 through *9. |
| * A soldering tip is not included in this product. The tips of desired shape should be purchased separately. |
Specifications
| Model No. | FM-203 |
|---|---|
| Power consumption | 140W |
| Temperature range | FM-2026/2027：200 to 450ºC FM-2022/2023：200 to 400ºC FM-2024：350 to 450ºC FM-2032：200 to 450ºC |
| Temperature stability | ±5ºC at idle temperature |
・Station
| Output voltage | AC 24V |
|---|---|
| Dimensions | 120(W)×120(H)×190(D)mm |
| Weight | 2.7kg |
・Soldering Iron
| Power consumption | 70W (24V) |
|---|---|
| Tip to ground resistance | <2Ω |
| Tip to ground potential | <2mV |
| Heating element | Composite heater |
| Cord length | 1.2m |
| Total length | 188mm (with 2.4D tip) |
| Weight | 30g (with 2.4D tip) |
* Total length and weight (w/o cord)
Replacement parts
| Part No. | Name | Specifications | |
|---|---|---|---|
 | B3216 | Sleeve assembly | yellow |
 | FM2027-02 | Connector assembly | |
 | FH200-01 | Iron holder <w/ cleaning wire> | with power-save function |
 | B2972 | Control card | |
 | B3253 | Connecting cable | |
 | B2300 | Heat resistant pad | |
 | B2756 | Tip tray | |
 | B3215 | Connector cover | for FM-2027 |
Options
| Part No. | Name | Specifications | |
|---|---|---|---|
 | FM2022-04 | HAKKO FM-2022 conversion kit | 140W (24V),for Japan, Oceania, Asia & Other countries |
 | FM2022-05 | HAKKO FM-2022 conversion kit | 140W (24V),for North America & EU |
 | FM2023-04 | HAKKO FM-2023 conversion kit | 140W (24V),for Japan, Oceania, Asia & Other countries |
 | FM2023-05 | HAKKO FM-2023 conversion kit | 140W (24V),for North America |
 | FM2023-06 | HAKKO FM-2023 conversion kit | 140W (24V),for EU |
 | FM2024-xx | HAKKO FM-2024 conversion kit | |
 | FM2026-03 | HAKKO FM-2026 | 70W (24V) |
 | FM2026-04 | HAKKO FM-2026 conversion kit | 70W (24V),for Japan, Oceania, Asia & Other countries |
 | FM2026-06 | HAKKO FM-2026 conversion kit | 70W (24V),for North America & EU |
 | FM2027-01 | HAKKO FM-2027 conversion kit | 70W (24V) |
 | FM2027-03 | HAKKO FM-2027 conversion kit | 70W (24V) |
 | FM2030-02 | HAKKO FM-2030 conversion kit | |
 | FM2031-02 | HAKKO FM-2031 conversion kit | 140W (24V) |
 | FM2032-52 | HAKKO FM-2032 conversion kit | |
 | B3218 | Sleeve assembly | blue |
 | B3219 | Sleeve assembly | green |
 | B3217 | Sleeve assembly | orange |
 | A1519 | Cleaning sponge | yellow |
 | A1536 | Cleaning sponge * Discontinued. The replacement is "A1519". | green |
Maintenance
| Category | Title |
|---|---|
| How to use | Select Tip Shape |
| How to use | Difference between BC/C type and BCF/CF type |
| How to use | HAKKO N2 system |
| How to use | Offset value input method (How to adjust the temperature on station-type units) |
| How to use | Combinations of handpieces and soldering tips for the FM/FX series |
| Maintenance | Why doesn't solder flow evenly onto a tip though it is brand-new? |
| Maintenance | If solder does not flow onto the tip... |
| Maintenance | Tip life |
| Maintenance | Why do tips oxidize easily when they are used with lead-free solder? |
| Maintenance | Maintenance and inspection of station-type soldering irons |
Гарантия
Пункт выдачи "На Московском"
Прием наличных: Да
Разрешён приём Н/П: Да
Ближайшая остановка: Лесной городок
ETK-79363